Embedding quasi-static time series within a genetic algorithm for stochastic optimization: the case of reactive power compensation on distribution systems

This paper presents a methodology for the optimal placement and sizing of reactive power compensation devices in a distribution system (DS) with distributed generation. Quasi-static time series is embedded in an optimization method based on a genetic algorithm to adequately represent the uncertainty introduced by solar photovoltaic generation and electricity demand and its effect on DS operation. From the analysis of a typical DS, the reactive power compensation rating power results in an increment of 24.9% when compared to the classical genetic algorithm model. However, the incorporation of quasi-static time series analysis entails an increase of 26.8% on the computational time required

Influence of the Pecking Motion Frequency on the Cyclic Fatigue Resistance of Endodontic Rotary Files

Purpose: To analyze the influence of the pecking motion frequency on the cyclic fatigue resistance of endodontic rotary files. Material and Methods: Sixty PlexV 25.06 endodontic rotary files were selected and distributed into three groups: 30 movements/min (n = 20), 60 movements/min (n = 20), and 120 movements/min (n = 20). A dynamic cyclic fatigue device was designed using Computer Aided Design/ Computer Aided Engineering (CAD/CAE) technology and manufactured by 3D impressions to simulate the pecking motion performed by an operator. Failures of the endodontic rotary files were detected by a Light-Emitting Diode (LED)/Light-Dependent Resistor (LDR) system controlled by an Arduino-Driver complex and management software. Endodontic rotary files were tested on an artificial root canal manufactured by wire electrical discharge machining (EDM), with similar dimensions to those of the instrument under examination. Endodontic rotary files were used following the manufacturer's recommendations. The results were analyzed by ANOVA and Weibull statistics. Results: All pairwise comparisons revealed statistically significant differences in all three variables, except for the difference in the number of cycles between the groups with 60 and 120 movements/min (p = 0.298). The scale distribution parameter of Weibull statistics showed statistically significant differences in all three variables, except for the differences in the number of cycles between groups with 30 and 60 movements/min (p = 0.0722). No statistically significant differences in the three variables were observed for the shape distribution parameter. Conclusion: A low frequency of pecking motion is recommended to reduce the risk of failure of endodontic rotary files associated with cyclic fatigue

The future of social is personal: the potential of the personal data store

This chapter argues that technical architectures that facilitate the longitudinal, decentralised and individual-centric personal collection and curation of data will be an important, but partial, response to the pressing problem of the autonomy of the data subject, and the asymmetry of power between the subject and large scale service providers/data consumers. Towards framing the scope and role of such Personal Data Stores (PDSes), the legalistic notion of personal data is examined, and it is argued that a more inclusive, intuitive notion expresses more accurately what individuals require in order to preserve their autonomy in a data-driven world of large aggregators. Six challenges towards realising the PDS vision are set out: the requirement to store data for long periods; the difficulties of managing data for individuals; the need to reconsider the regulatory basis for third-party access to data; the need to comply with international data handling standards; the need to integrate privacy-enhancing technologies; and the need to future-proof data gathering against the evolution of social norms. The open experimental PDS platform INDX is introduced and described, as a means of beginning to address at least some of these six challenges

Biochemical and morphometric approaches to characterize farmed tilapias

Biochemical (electrophoresis and mitochondrial DNA) and morphological analysis are important tools for the characterization of strains. Reference is made to studies conducted in the framework of the Genetic Improvement of Farmed Tilapias project to establish a new base tilapia population for culture purposes, describing the basic concepts of electrophoresis and morphometric analysis

Design of a precision compactor for use in guided bone regeneration in the area of oral surgery

During the processes of guided bone regeneration in the maxillary bones, which aim to recover or preserve support tissue for the placement of implants on which dental prostheses are retained, the use of various particulate graft biomaterials from different sources (animal or synthetic) is standardized. At present, the pressure of compaction of this material in the recipient bone is manual, dependent on the clinician, although there is some scientific evidence on the effects of different compressive forces on angiogenesis and prognosis of the regeneration of the grafted areas. The aim of the present study is to design, calibrate and verify in vitro a compaction instrument for clinical use, which allows a controlled and precise compaction pressure of the particulate graft biomaterial and standardize the procedure. The designed instrument is a precision compactor of adequate size for proper intra and extraoral clinical manageability and manufactured in a sterilizable material by autoclaving. The range of compression that allows (0 -1, 82 Newton), is within the forces that are commonly applied in surgery and that have been determined by a specific test on 8 oral surgeons. Instrument calibration has been performed by an independent accredited company. The testing of the instrument was carried out by an in vitro test where the biomaterial was compacted at different forces (0, 80 and 1, 82 Newton) and was observed by a computerized micro-tomography that when increasing the compression force, decreased the space between particles provided for the migration and proliferation of new blood vessels and cells. Durante los procedimientos de regeneración ósea guiada en los huesos maxilares, que tienen como objetivo recuperar o preservar tejido de soporte para la colocación de implantes sobre los que se retienen las prótesis dentales, está estandarizado el uso de diversos biomateriales de injerto particulado de diferente procedencia (animal o sintético). En la actualidad la presión de compactación de dicho material en el hueso receptor es manual, clínico dependiente, pese a que existe cierta evidencia científica sobre los efectos de las diferentes fuerzas de compresión en la angiogénesis y pronóstico de la regeneración de las zonas injertadas. El objetivo del presente estudio es el de diseñar, calibrar y comprobar in vitro un instrumento de compactación para uso clínico, que permita una presión de compactación controlada y precisa del biomaterial de injerto particulado y estandarizar el procedimiento. El instrumento diseñado es un compactador de precisión de tamaño adecuado para una correcta manejabilidad clínica intra y extraoral y fabricado en un material esterilizable por autoclavado. El rango de compresión que permite (0 – 1, 82 Newton), está dentro de las fuerzas que se aplican comúnmente en cirugía y que se han determinado mediante una prueba específica sobre 8 cirujanos orales. La calibración del instrumento se ha realizado por una empresa acreditada independiente. La comprobación del instrumento se ha realizado mediante un ensayo in vitro donde se compactó el biomaterial a diferentes fuerzas (0, 80 y 1, 82 Newton) y se observó mediante micro-tomografía computerizada que al aumentar la fuerza de compresión disminuía el espacio entre partículas provisto para la migración y proliferación de los nuevos vasos sanguíneos y células

Geology of La Reforma caldera complex, Baja California, Mexico

A new geological map at 1:50,000 scale of La Reforma Caldera Complex has been produced applying modern survey methodologies to volcanic areas. This map aims to represent a reliable and objective tool to understand the geological evolution of the region. La Reforma Caldera Complex is a Pleistocene nested caldera located in the central part of the Baja California peninsula, Mexico. The twelve formations defined within the Quaternary volcanic record were grouped into three phases (pre-caldera, caldera, and post-caldera). The pre-caldera phase (>1.35 Ma) is characterized by scattered eruptions, mostly occurred in submarine environment. The caldera phase (1.35–0.96 Ma) groups several distinct explosive and effusive eruptions that formed the present-day caldera depression. The post caldera phase includes scattered effusive eruptions (ended at 0.28 Ma) and resurgence, characterized by several hundred meters of uplift of the central block within the caldera depression

Development and Validation of Hepamet Fibrosis Scoring System-a Simple, Non-invasive Test to Identify Patients With Nonalcoholic Fatty liver Disease With Advanced Fibrosis

BACKGROUND & AIMS: Fibrosis affects prognoses for patients with nonalcoholic fatty liver disease (NAFLD). Several non-invasive scoring systems have aimed to identify patients at risk for advanced fibrosis, but inconclusive results and variations in features of patients (diabetes, obesity and older age) reduce their diagnostic accuracy. We sought to develop a scoring system based on serum markers to identify patients with NAFLD at risk for advanced fibrosis. METHODS: We collected data from 2452 patients with NAFLD at medical centers in Italy, France, Cuba, and China. We developed the Hepamet fibrosis scoring system using demographic, anthropometric, and laboratory test data, collected at time of liver biopsy, from a training cohort of patients from Spain (n=768) and validated the system using patients from Cuba (n=344), Italy (n=288), France (n=830), and China (n=232). Hepamet fibrosis score (HFS) were compared with those of previously developed fibrosis scoring systems (the NAFLD fibrosis score [NFS] and FIB-4). The diagnostic accuracy of the Hepamet fibrosis scoring system was assessed based on area under the receiver operating characteristic (AUROC) curve, sensitivity, specificity, diagnostic odds ratio, and positive and negative predictive values and likelihood ratios. RESULTS: Variables used to determine HFS were patient sex, age, homeostatic model assessment score, presence of diabetes, levels of aspartate aminotransferase, and albumin, and platelet counts; these were independently associated with advanced fibrosis. HFS discriminated between patients with and without advanced fibrosis with an AUROC curve value of 0.85 whereas NFS or FIB-4 did so with AUROC values of 0.80 (P=.0001). In the validation set, cut-off HFS of 0.12 and 0.47 identified patients with and without advanced fibrosis with 97.2% specificity, 74% sensitivity, a 92% negative predictive value, a 76.3% positive predictive value, a 13.22 positive likelihood ratio, and a 0.31 negative likelihood ratio. HFS were not affected by patient age, body mass index, hypertransaminasemia, or diabetes. The Hepamet fibrosis scoring system had the greatest net benefit in identifying patients who should undergo liver biopsy analysis and led to significant improvements in reclassification, reducing the number of patients with undetermined results to 20% from 30% for the FIB-4 and NFS systems (P<.05). CONCLUSIONS: Using clinical and laboratory data from patients with NAFLD, we developed and validated the Hepamet fibrosis scoring system, which identified patients with advanced fibrosis with greater accuracy than the FIB-4 and NFS systems. the Hepamet system provides a greater net benefit for the decision-making process to identify patients who should undergo liver biopsy analysis

Direct observation of betatron oscillations in a laser-plasma electron accelerator

International audienceDuring experiments performed on a laser-plasma–based accelerator, correlation of the electron output angle with the electron energy has been observed. These spectral oscillations of the electron beam centroid are attributed to betatron oscillations of the electron beam during its propagation. An analytical model for betatron oscillations including constant longitudinal acceleration is described and used to validate the scenario and retrieve physical parameters. The oscillations can arise from an off-axis injection of the electrons, which can be reproduced using an asymmetric laser intensity profile in Particle-In-Cell (PIC) simulations. This study emphasizes the influence of non-ideal interaction conditions inherent to experiments